Control of type O foot-and-mouth disease by vaccination in Korea, 2014–2015

On December 3, 2014, a type O foot-and-mouth disease (FMD) outbreak began in Korea. Although vaccinations were administered, FMD cases increased steadily for five months, and reached 185 cases by April 2015. Most of the affected animals were pigs, which are vulnerable to vaccination. The FMD virus belonged to the South-East Asia (SEA) topotype that had been observed three times in Korea between April 2010 and July 2014. However, the FMD virus isolated in December 2014 had a unique feature; that is, partial deletion of the 5′ non-coding region, a deletion not seen in previous SEA topotype isolates identified in Korea. We conclude that this outbreak included the introduction of a new FMD strain to Korea, and that Korea was now affected by genetically similar FMD virus strains that are related to those from neighboring countries.

Characterization of Echinostoma cinetorchis endoribonuclease, RNase H

Echinostoma cinetorchis is an oriental intestinal fluke causing significant pathological damage to the small intestine. The aim of this study was to determine a full-length cDNA sequence of E. cinetorchis endoribonuclease (RNase H; EcRNH) and to elucidate its molecular biological characters. EcRNH consisted of 308 amino acids and showed low similarity to endoribonucleases of other parasites (<40%). EcRNH had an active site centered on a putative DDEED motif instead of DEDD conserved in other species. A recombinant EcRNH produced as a soluble form in Escherichia coli showed enzymatic activity to cleave the 3′-O-P bond of RNA in a DNA-RNA duplex, producing 3′-hydroxyl and 5′-phosphate. These findings may contribute to develop antisense oligonucleotides which could damage echinostomes and other flukes.

Comparison of implant survival rate by sinus lifting technique in implantation with sinus lift / 대한치주과학회지

PURPOSE: The purpose of this study was comparison of survival rate of implant as two sinus elevation techniques and when window opening procedure had done it was comparison of survival rate of implant between the procedure of implantation after 6 month of sinus elevation to allow healing period and that of implantation with sinus elevation simultaneously. MATERIAL AND METHODS: All 79 of patients treated at DanKook University Dental Hospital Dept. of Periodontics for 164 implantation of maxillary posterior edentulous area with sinus elevation. Sinus elevation technique was divided of the technique : Osteotome technique and window opening technique. RESULT: 14 implants among 96 implants was failed implants of using osteotome for sinus elevation whereas one implant of 68 implants was failed of using window opening technique. CONCLUSION: Window opening technique had higher survival rate than osteotome technique. In case of window opening, there was no significant difference of immediate implantation and delayed implantation.

A study on the biological characteristics of modified titanium surface / 대한치주과학회지

PURPOSE: The purpose of this research is to study about initial adhesion, proliferation and activation of osteoblast to titanium surface treated with machined, hydroxyapatite coating, resorbable blast material blasting and anodizing method. MATERIAL AND METHODS: After treating the titanium surface of each block with machined, impurities were removed and sterilized. The number of cells attached from cultured osteoblast of respective experimental groups were measured at 1, 4, 7, and 14day and alkaline phosphatase, calcium, and inorganic phosphate concentration of cultured solution was measured. RESULT: Anodizing group showed the highest rate of cell attachment and proliferation activity. RBM treated group showed the highest increasing on their alkaline phosphatase activity, on the calcium apposition, on inorganic phosphate apposition of 1 and 4 days in cultured osteoblast to compare with other groups. CONCLUSION: On the basis of these findings, we conclude that surface modification of titanium was profoundly effected on the attachment, proliferation and activation of osteoblast in initial stage osseointegration.

A Comparison of Clinical Effect for Root Coverage / 대한치주과학회지

PURPOSE: The purpose of this study was to compare clinical effect of the Langer & Langer technique , the modified Langer & Langer technique and Bruno technique. MATERIAL AND METHODS: 30 patients who have gingiva recession(Miller class I or class II) were carried root coverage. Langer & Langer technique(14 patients/32 tooth), modified Langer & Langer technique(5 patients/10 tooth) and Bruno technique(11 patients/18 tooth) was carried. At baseline and average 3 months after operation, it was estimated clinical index(Pocket depth, gingiva recession, clinical attachment level, keratinized gingiva, scar tissue, root coverage rate) by Williams style probe. RESULT: Root coverage rate is indicated Langer & Langer technique(85%), Modified Langer & Langer technique(86%) and Bruno technique(90%). CONCLUSION: All three of the procedures were effective in gingival recession and improved clinical parameters.

Comparison analysis of pain experienced by patients during periodontal examination using thinner versus thicker probes / 대한치주과학회지

During periodontal examination and periodontal recall visit, patients might feel pain. Probing with 0.45mm diameter probe, "overprobing" into connective tissue underlying periodontal pocket could be the primary aspect of pain. The purpose of present study, performed during recall visit, was to compare the levels of pain experienced by patients during periodontal probing using probes with the tip diameter of either 0.45mm or 0.63mm. Twenty patients were enrolled: 3 periodontists each exammined 20 patients at the Dankook university dental hospital. in each patient at six sites per tooth, diagonal maxillary/mandibular quadrants were probed with 0.45mm diameter and 0.63mm diameter probe. Lower pain responses following probing with the 0.63mm diameter probe as compared to the 0.45mm probe were observed for patients of therapist 2 and the upper VAS quartile Groups(P<0.05). For therapist 1 and 3 groups, no differences were found. Patient worry about the pain while dental treatment procedures. If therapist use 0.63mm diameter probe while periodontal examination and recall visit, the patient's pain and discomfort could be reduced. Therefore, patient will cooperate more during the treatment, which leads to a better result. Dental therapists should make an effort to minimize the degree of discomfort during treatment. Dental therapist periodically should evaluate this part of their skill by asking patients and promote this skill.

The comparison clinical study effect of Diode Laser & Ms coat usage for dentinal hypersensitivity following Periodontal therapy / 대한치주과학회지

The purpose of this study was to evaluate the effect of diode laser & desensitizing agents to overcome hypersensitizing root surfaces problem after periodontal treatment. 20 patients(60 teeth) presented were volunteered in this study. Diode laser & MS coat was respectively applied on hypersensitizing root surfaces after periodontal treatments. Following application, they were evaluated immediately. The results were as follows: 1. The frequency and degree of root surface hypersensitivity levels were measured by the sequence of tactile and air stream. 2. Reduction of root surfaces hypersensitivity by tactile were for Diode laser and Ms coat application respectively 3.0294+/-2.0224 and 3.2692+/-1.6139. 3. Reduction of root surfaces hypersensitivity by air stream were for Diode laser and Ms coat application respectively 3.0294+/-2.0224 and 3.2692+/-1.6139. 4. It could be said that Diode Laser and Ms coat application were significantly effective in reducing dentin hypersensitivity as far as concerned effect, Ms coat applicatio showed more effective than Diode laser. In conclusion, both methods were significantly effective in reducing dentinal hypersensitivity. Therefore, it was recommended that Diode laser and desensitizing agents could be used routinely for patients dentinal hypersensitivity following periodontal treatment.

Radiographic evaluation of alveolar bone profile of maxillary anterior teeth in Korean young adult / 대한치주과학회지

In order to achieve a satisfactory esthetic result of periodontal surgery or implant in maxillary anterior area, periodontists must be aware of normal alveolar bone anatomy. The purpose of this study was to evaluate the relationship of alveolar bone morphology to tooth shape and form. 78(mean age : 25 yrs) periodontally healthy volunteers participated in this study. Two maxillary central incisor and one lateral incisor were selected to study. With minimal local anesthesia, guttapercha cone inserted to labial gingival sulcus of selected teeth just after bone sounding with periodontal probe. Metal ball (4mm diameter) attached to palatal fossa of central incisor. Then, periapical radiograph was taken according to long cone paralleling technique. After film scan, labial alveolar bone profile reproduced along interproximal bone and apical ends of gutta-percha cones on computer screen. By utilizing computer program, the distance from height of interproximal bone to the labial bone crest in central incisor-central incisor and central incisor-lateral incisor area was measured and converted to real distance by using vertical length of metal ball on film. After measuring crown length & width of central incisor, the 10 individuals ranked lowest CW/L ratio (crown width/length ratio) and the 10 ranked highest were selected as having a long-narrow(group N), or a short-wide(group W) form of the central incisors. Means of the distance from height of interproximal bone to the labial bone crest of group N, W were calculated and compared by means of independent t-test. The results were as follows: 1. Mean distance from the height of the interproximal bone to the labial bone crest was 3.5+/-0.7mm between two central incisor, and 2.8+/-0.6mm between central and lateral incisor. 2. Mean CW/L ratio of group N was 0.57, and group W was 0.8. Mean distance from the height of the interproximal bone to the labial bone crest of group N was higher than group W in both measured area(measurements of group N, W were 3.9+/-0.2mm and 3.5+/-0.2mm between two central incisor, 3.0+/-0.2mm and 2.8+/-0.2mm between central and lateral incisor), but there were no statistically significant differences when the groups were compared. Within the limits of the present study, there was a tendency that subjects with long-narrow teeth have more scalloped alveolar bone profile than subjects with short-wide teeth in upper anterior area, but no statistically significant differences were found.

Study on the stress distribution around two types of implants with an internal connection by finite element analysis / 대한치주과학회지

Adequate bone quality and stress distribution to the bone are of decisive importance for implant success. Even though the success rates of dental implants have been high, implant failures do occur. Overloading has been identified as a primary factor behind dental implant failure. The purpose of this study was to theoretically investigate the effect of two types of implants on the stress distribution in poor bone quality. Employing the finite element method, the study modeled a 4.1 mm diameter, 12.0 mm length implant placed in cortical or spongeous bone. A static loading of 100N was applied at the occlusal surface at 0, 30 degrees angle to the vertical axis of the implant. von Mises stresses concentrations in the supporting bone were analyzed with finite element analysis program. The results were as follows; 1. The stresses at the marginal bone were higher under buccal oblique load(30 degrees off of the long axis) than under vertical load. 2. Under buccal oblique load, the stresses were higher at the lingual marginal bone than at the buccal marginal bone, and the differences were almost the same. 3. Under vertical and oblique load, the stress was the highest at the marginal bone and lowest at the bone around apical portions of implant in cortical bone. 4. Under vertical load, Model 1 showed more effective stress distribution than Model 2 irrespective of bone types. On the other hand, Model 2 showed lower stress concentration than Model 1 under buccal oblique load.

A study on the periodontal status of second molar adjacent third molar / 대한치주과학회지

The purpose of this study was to determine the relationship between the third molar and periodontal status of the adjacent second molar. Fifty patients who had four maxillary and mandibular second molars were consecutively selected for the study subjects. The subjects provided a total of 200 molars, i.e., 100 maxillary and 100 mandibular molars, and classified the groups as follows; third molars that are normally erupted are control group, that are impacted are test 1 group, that are simply extracted are test 2 group, that are surgically extracted are test 3 group. Probing depth, plaque index, gingival index and mobility were measured. The results were as follows. 1. In mesial probing depth, there was no significantly difference. In distal probing depth, there was a significantly difference between control group and test 1 & 3 group in maxilla and between control & test 2 group and test 1& 3 group in mandible(p<0.05). 2. In buccal probing depth, there was a significantly difference between test 2 group and test 3 group in mandible. In lingual probing depth, there was a significantly difference between control group and test 1 & 3 group in mandible(p<0.05). 3. In plaque index, there was a significantly difference between test 1 group and test 2 group in maxilla, between test 1 group and control & test 2 group in mandible(p<0.05). 4. In gingival index, there was a significantly difference between control group and test 1 & 3 group in mandible. In mobility, there was no significantly difference(p<0.05). As a result of this study, the second molars adjacent to the third molars that are impacted or surgically extracted had poor prognosis, so impacted third molars should be extracted in early time and the second molars are actively treated for periodontal health.

A study of distribution, prevalence and relationship of the localized periodontitis of first and second molar root fusion / 대한치주과학회지

The purpose of this study was to determine the distribution, prevalence and relationship of the localized periodontitis of root fusion in maxillary and mandibular molars. One hundred patients who had eight maxillary and mandibular molars(third molars excluded) were consecutively selected for the study subjects. The subjects provided a total of 800 molars, i.e., 400 maxillary and 400 mandibular molars. A decision about root fusion was made on the radiographic examination. Probing depth, plaque index, gingival index and mobility were measured. The results were as follows. 1. 15.9% of the molars had a fused root. 22% of the maxillary molars and 9.8% of the mandibular molars had a fused molars. 2. In maxillary molars, the results of probing depth, plaque index, gingival index, mobility are more higher in test group than in control group, and there was a significantly difference except plaque index of maxillary first molars group(p<0.01). 3. In mandibular molars, the results of probing depth, plaque index, gingival index, mobility are more higher in test group than in control group, and there was a significantly difference(p<0.01). As a result of this study, it can be concluded that, in management of molars with a root fusion, we should detect the molars through the precise radiographic examination, early periodontal treatment and systematic treatment plan should be chosen. And postoperative continuing supportive periodontal therapy is needed.

A comparative study of the clinical effects of Fibrin adhesive and Calcium sulfate barrier in the treatment of mandibular class II furcations using Xenograft / 대한치주과학회지

Periodontal regeneration refers to the restoration of bone, cementum and periodontal ligament to their original levels before damage from periodontal disease process. Various surgical techniques to the promotion of periodontal regeneration have been used. Bone graft and guided tissue regeneration have used for the regeneration of furcation involvements which caused by periodontal disease. Fibrin adhesive is agents that have been shown to be effective in periodontal regeneration and biological carrier. Calcium sulfate which is one of the resorbable barrier materials has used for guided tissue regeneration. The purpose of this study was to compare the clinical effects between bone graft using fibrin adhesive and calcium sulfate barrier in the mandibular class II furcation involvement. For the study, twenty-six class II furcation involved teeth were surgically treated. 13 furcation defects(test group) were treated with bonegraft and fibrin adhesive and the others(control group) were treated with bone graft and calcium sulfate barrier. Pocket depth, clinical attachment level and gingival recession were measured at baseline, postoperative 3 and 6 months. The results of the study are as follows: 1. The change of pocket depth and clinical attachment level in both groups was decreased significantly at 3, 6 months than at baseline(p<0.05). 2. The change of gingival recession in both groups was increased significantly at 3, 6 months than at baseline(p<0.05). 3. The change of pocket depth and clinical attachment level in both groups was decreased at 3, 6 months, and the change of gingival recession in both groups was increased at 3, 6 months but there were no statistically or clinically significant differences with both groups. 4. The significant reduction of the pocket depth and clinical attachment level exhibited marked changes at 3 months in both groups. In conclusion, the results of this study suggest that there are no statistically or clinically significant differences between fibrin adhesive and calcium sulfate barrier in the treatment of class II furcations using xenograft.

Study on the stress distribution depending on the bone type and implant abutment connection by finite element analysis / 대한치주과학회지

Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant-bone interface. Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA. A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of 100N were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type IV. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model 1.

A comparative study on the bite force after modified Widman's flap / 대한치주과학회지

The masticatory function of tooth is maintained by the periodontal health, and periodontal health is also maintained by the masticatory function. Bite forces are withstanded by the PDL, and this thought to be through the viscoelastic theory. Mobility test and Bite force test are used to evaluate the viscoelastic theory of the PDL. In this study, the bite force test was used. In the same conditions of quantity of the supporting tissue, the maximum bite force according to the quality of the supporting tissue was evaluated. The study was conducted on 40 patients with moderate adult periodontitis, who were indications to the modified widman flap treatment. The maximum bite force in the premolar and molar regions were tested before treatment, 3weeks and 4 weeks after treatment. and the results were as follows. 1. In the premolar region, 3 weeks and 4 weeks after treatment showed higher maximum bite force than before treatment. And in the molar region the maximum bite force decreased 3 weeks after treatment, but increased after 4 weeks, compared to before treatment. 2. In the 1st premolar, there were only significant difference between before and 3 weeks after treatment, and between and 4 weeks after treatment. 3. In the 2nd premolar, there were only significant difference between before and 3 weeks after treatment, and between and 4 weeks after treatment. 4. In the 1st molar, there were no significant difference between before, 3 weeks after treatment, 4 weeks after treatment. 5. In the 2nd molar, there were no significant difference between before, 3 weeks after treatment, 4 weeks after treatment. From the results above, it shows that there were improvements in the maximum bite force through specific periodontal treatments, and thus it can be considered in clinical situations, that selection of the prosthodontic material, decisions of extraction, evaluation of the prognosis after periodontal treatment is a helpful method.

The Effects of various Regeneration techniques on Bone Regeneration around Dental Implant / 대한치주과학회지

The successful implantation necessitate tissue regeneration in site of future implant placement, there being severe bone defect. Therapeutic approaches to tissue regeneration in the site have used bone grafts, root surface treatments, barrier membranes, and growth factors, the same way being applied to periodontal tissue regeneration. Great interest in periodontal tissue regeneration has lead to research in bone graft, guided-tissue regeneration, and the administration of growth factors as possible means of regenerating lost periodontal tissue. The blood component separated by centrifuging the blood is the platelet-rich plasma. There are growth factors, PDGF, TGFbeta1, TGFbeta2 and IGF in the platelet-rich plasma. The purpose of this study was to study the histopathological correlation between the use of platelet-rich plasma and the healing of bone defect around implant fixture site. Implant fixtures were inserted and graft materials were placed into the left femur of in the experimental group, while the control group received only implant fixtures. In the first experimental group, platelet-rich plasma and BBP xenograft were placed at the implant fixture site, and the second experimental group had platelet-rich plasma, BBP xenograft, and the e-PTFE membrane placed at the fixture site. The degree of bone regeneration adjacent to the implant fixture was observed and compared histopathologically at 2, 4, and 8 weeks after implant fixture insertion. The results of the experiment were as follows: 1. Bone remodeling in acid etched surface near the implant fixture of all experimental groups was found to be greater than new bone formation. 2. Bone remodeling in acid etched surface distant to the implant fixture of all experimental groups was decreased and new bone formation was not changed. 3. Significant new bone formation in machined surface near the implant fixture of bothl experimental groups was observed in 2 weeks. 4. New bone formation in machined surface distant to the implant fixture of both experimental groups was observed. Bone remodeling was significant in near the implant fixture and not in distant to the implant fixture. The results of the experiment suggested that the change of bone formation around implant. Remodeling in machined surface distant to the implant fixture of both experimental groups, and new bone formation and remodeling near the implant fixture were significant.

Comparative study on the Effects of Platelet-Rich Plasma and Enamel Matrix Protein on Supracrestal bone Regeneration of Dental Implant / 대한치주과학회지

The current interest in periodontal tissue regeneration has lead to research in bone graft, root surface treatments, guided-tissue regeneration, administration of growth factors, and the use of enamel matrix protein as possible means of regenerating lost periodontal tissue. Several studies have shown that a strong correlation between platelet-rich plasma and the stimulation of remodeling and remineralization of grafted bone exits, resulting in a possible increase of 15-30% in the density of bone trabeculae. The purpose of this study was to study the histopathological results and differences between the use of platelet-rich plasma and the use of enamel matrix protein(Emdogain?) about bone regeneration at the implant. Implant fixtures were inserted and graft materials placed into the left femur in the experimental group, while the only implant fixtures placed in the control group. In the first experimental group, platelet-rich plasma and xenograft were placed at the supracrestally placed implant site, and in the second experimental group, Emdogain(R) and xenograft placed at the supracrestally placed fixture site. The degree of bone regeneration adjacent to the implant fixture was observed and compared histopathologically at 2, 4, and 8 weeks after implant fixture insertion. The results of the experiment are as follows: 1. The rate of osseointegration to the fixture threads was found to be greater in the experimental group compared to in the control group. 2. The histopathological findings showed that the bone regeneration, the partial osseointegration existed at 4 weeks, and that osseointegration and bone density increaced in the experimental groups at 8 weeks. 3. The results showed that new bone formation and bone remodeling increased in the area near to the fixture in the first and second experimental groups at 8 weeks than at 4 weeks. The results showed that in the area distant from the fixture, new bone formation did not increase and bone remodeling decreased in the first experimental group at 4, 8 weeks, and that new bone formation increased in the second experimental group. 4. The histopathological findings showed that AZ deposition in the first experimental group was remarkable at 2, 8 weeks, and in the second experimental group at 2, 4, 8 weeks in the area distant from the fixture threads.

Clinical and histopathological study using platelet-rich plasma and bone graft in the localized alveolar bone defects / 대한치주과학회지

Alveolar ridge defects may limit or restrict placement of implants. The purpose of this study was to evaluate clinical and histopathologic results which occur following guided bone regeneration using platelet-rich plasma, bovine bone powder and e-PTFE membrane in the localized alveolar bone defects. Ten patients who required guided bone regeneration in implant placemnet, were slelected. Alveolar crest height and width were measured at baseline and, afer 2nd surgery 5 months later At 5 months , we obtained histopathological results as follows: 1. Alveolar crest height was an average of 8.20+/-3.74 mm preoperatively and decreased to an average of 7.40 +/-1.84 mm postoperatively. There was no significant difference. 2. Alveolar crest width was an average of 4.25+/-2.03 mm preoperatively and significantly increased to an average of 7.20+/-2.44 mm postoperatively (P<0.01) 3. The change of Alveolar crest height and width were 0.80+/-1.40 mm, 2.95+/-1.09 mm 4. Histopathological evaluations revealed new bone formation with graft material and laminated bone containing the presence of osteocyte-like cell In conclusion, guided bone regeneration using platelet-rich plasma, bovine bone powder and e-PTFE membrane would provide a viable therapeutic alternative for implant placement in the localized alveolar defect or implant failure

A comparative study of the effect of root planing methods and various conditioning agents / 대한치주과학회지

The purpose of this study was to compare the effect of tetracycline HCL, Citric acid and PrefGel applied on the root surfaces that planed with periodontal curret with Roto bur. In this study, 20 extracted teeth with advanced periodontal disease were used. The teeth were root planing with periodontal curette and Roto bur. Following root planing, each agents was burnished on the prepared root surface for 3 minutes to find opened dentinal tubules. And then, each specimens were investigated using scanning electron microscope. Amount of remained cementum by loss of tooth substance index and the number of opened dentinal tubules were evaluated to each specimens The results were as follows. 1. Groups treated with periodontal curette were almost seemed no removed. Other groups treated with Roto bur showed partially opened dentinal tubule orifices. 2. Loss of tooth substance index were compared between groups. There was no statistically difference between periodontal curette groups. Between Roto bur groups was alike. But there were statistically differences between periodontal curette and Roto bur groups. 3. At comparing with various root conditioning agents, Tetracycline HCL group took statistically higher than Citric acid and PrefGel in opened dentinal tubules. On the other hand, there was no statistically difference between Citric acid group and PrefGel group. As a result of this study, groups treated with Roto bur showed more cementum removed than groups treated with periodontal curette. In a treatment for regeneration of periodontal tissue, it was regarded that Roto bur should be used and that Tetracycline HCL would be more effective as chemical root conditioning agent.

Clinical and histopathological study on the effect of Nonresorbable membrane with Demineralized freeze dried bone graft for Guided Bone Regeneration in Implant Dehiscence Defects / 대한치주과학회지

The purpose of this study is to examine the effect of non-resorbable membrane such as e-PTFE which was used with DFDB in bone regeneration on dehiscence defect in peri-implant area. Amomg the patients, who have recieved an implant surgery at the department of Periodontics in Dan Kook University Dental Hospital, 12 patients showed implant exposure due to the dehiscence defect and 15 implants of these 22 patients were the target of the treatment. Periodontists randomly applied Gore-Tex(R) to the patients and treated them with antibiotics for five days both preoperatively and postoperatively. Reentry period was 26 weeks on average in maxilla and 14 weeks on average in mandible. The results were as follows : 1. Dehiscence bone defect frequently appeared in premolar in mandible and anterior teeth in maxilla respectively. 2. Among 15 cases, 1 membrane exposure was observed and in this case, regenerated area was decreased. 3. In non-resorbable membrane, bone surface area 9.25+/-4.84 preoperatively and significantly increased to 11.48+/-7.52 postoperatively(P<0.05). 4. The increase of bone surface area in non-resorbable membrane was 2.23+/-3.38. 5. As a result of histopathological finding, DFDB surrounded by new bone formation and lamellate bone, resorption of DFDB and bone mineralization was found. Also, fibrosis of connective tissue beneath the membrane was found. This study shows that the surgical method using DFDB and non-resorbable membrane on dehiscence defect in peri-implant area is effective in bone regeneration.

A comparative study of the clinical effects of chitosan nanofiber membrane in the treatment of mandibular class II furcation defects / 대한치주과학회지

The purpose of this study was to evaluate the clinical efficacy of guided tissue regeneration(GTR) technique using chitosan nanofiber membrane and to compare it to the clinical efficacy following GTR using PLA/PLGA(copolymer of polylactic acid and polylacticglycolic acid) membrane in mandibular class II furcation defects in human. The chitosan nanofiber membranes were applied to the mandibular class II furcation defects of 13 patients(test group) and PLA/PLGA membranes were applied to those of 11 patients(control group). Probing pocket depth, clinical attachment level, gingival recession, plaque index and gingival index were measured at baseline and 3 months postoperatively. Vertical and horizontal furcation defect depth were measured at surgery. Both groups were statistically analyzed by Wilcoxon signed Ranks Test and Mann-Whitney Test using SPSS program. The results were as follows: 1. Probing pocket depth, clinical attachment loss and gingival index were significantly reduced at 3 months postoperatively compared to values of baseline in both groups(p<0.05). 2. Gingival recession and plaque index were not significantly decreased at 3 months postoperatively compared to values of baseline in both groups. 3. No significant difference between two groups could be detected with regard to changes of probing pocket depth, gingival recession, clinical attachment level, plaque index and gingival index at 3 months postoperatively. In conclusion, chitosan nanofiber membrane is effective in the treatment of human mandibular class II furcation defects and a longer period study is needed to fully evaluate the outcomes.